ULN-2
Specification
|
2d DSP and MIO Console |
System Requirements |
What's Included |
ULN-2 Technical Specifications
Mic Inputs
|
Stepped Gain Range
Gain Range with Trim Input Impedance Harmonic Distortion @1kHz (+9dBu in @ 6 dB Gain) Intermodulation Distortion 1k component (19 kHz/20kHz @ +8dBu) |
+6 dB – +72 dB (6 dB Steps)
-14dB – +70 dB 3.3 kΩ 0.0005% -96 dBu |
Equivalent Input Noise (E.I.N.)
20 Hz – 20 kHz Flat @ 72 dB Gain
|
150Ω Source
50Ω Source 0Ω Source |
-130.5 dBu
-132.0 dBu -134.0 dBu |
Frequency Response
|
18 Hz – > 20 kHz
8 Hz – > 50 kHz 3 Hz – >100 kHz |
± 0.1 dB
± 1.0 dB ± 3.0 dB |
Crosstalk @1kHz
|
trim link engaged
trim link disengaged |
-107 dB
-132 dB |
Maximums
|
Max Gain
Preamp Phantom Power |
72 dB
Headroom 20 dB above Digital Clip +48v Regulated, high current, individually switchable, P48 test compliant, short circuit/ hot-swap protected |
Physical Specs
|
Controls
|
Stepped Gain (12 steps 6dB – 72 dB)
Continuous Attenuator on return Attenuation link Mic/Line Select switch Independent Monitor Volume Controls Independent Phantom Power Controls |
|
Dimensions
[W x D x H] |
13.75” x 8.25” x 1.73”
34.9 cm x 21 cm x 4.4 cm |
|
Weight
|
4 lbs
1.8 kg |
Power
|
Rating
Connectors |
8 watts @ 9 – 30v DC
2.1 mm Coaxial 4 pin XLR Broadcast Battery FireWire |